UeeVii
UeeVii CPE850 Gigabit High Speed ๏ผ๐๐ Wireless Bridge,2-Pack
Plug and play&Easy to Use
5KM Wide Range
Network Expansion & Surveillance Expansion
Support POE power supply
Shipping & Returns
1. Ship the goods immediately after confirming the order.
2. 30-day money-back guarantee for any reason
3. 12-month warranty for quality-related issues
4. Lifetime free technical support service
5. We take care of all quality-related issues with a REPLACEMENT.
6. Reminder: Be sure to use your product as directed.
- 5.8G Gigabit Wireless Bridge & Fast Speed: CPE850 Gigabit wireless bridge is a 5.8G long-range WiFi extender outdoor CPE with a digital tube display. The bridges are built in one 100Mbps port and one 1000Mbps port, the maximum transfer rate between the 2 bridges is 1200Mbps. The maximum achievable maximum network speed is 750Mbps, in practical applications, the signal will be attenuated, and the actual network speed will be lower.
- Plug and play&Easy to Use: This outdoor point-to-point wireless bridge has been paired at the factory and can be directly connected to use. The long range wifi bridge support point-to-point, point-to-multipoint application. Point-to-point pairing can be done by dialing a code without entering the GUI, and it can be automatically paired when the power is restored after a power failure, which is very simple to use
- 5KM Wide Range: The outdoor wifi bridge point to point built-in a 16dBm directional antenna, the maximum 27dBm can automatically adjust the power to adapt to environmental changes, the transmission distance can reach 5km (barrier-free), and the actual application distance should be less than 5KM. Trees will not block the transmission speed of peer-to-peer internet wireless bridges, suitable for shops, warehouses or garages near your home
- Network Expansion & Surveillance Expansion: This point-to-point internet bridge easily helps you extend the network range to a second building (barn, shop, warehouse, garage), or wirelessly extend the IP camera surveillance range. WDS networking mode, video network dual compatibility. IP65-rated weatherproof enclosure for continuous operation in harsh outdoor environments, ideal for outdoor use
- Support POE power supply: support 24V POE power supply, easy to install and deploy, simplify construction. The ueevii wireless bridge performs in-depth protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission, smooth video surveillance, and in-depth optimization of the underlying wireless driver. It adopts 5.8G IEEE 802.11ac single-frequency wireless transmission technology, which has stronger anti-interference ability and stability.
- UeeVii CPE850 WiFi bridge is widely used in warehouses, farms, and house lane monitoring systems. Point to point extend network WiFi range, extend the network in the house to your barn, garage, church, warehouse, and even neighbor's house through wireless bridge signal transmission.
How to Access and Setting the Wireless Bridge CPE Through Computer Access:
Step 1. Use a PoE adapter to power the wireless bridge through a network cable. Pay attention to the "PoE" and "LAN" ports marked on the PoE adapter, and power is supplied by POE instead of a DC power interface.
Step 2. Use a network cable to connect the CPE "LAN" port, connect the network cable other ends to the PoE Adapter "POE" port, use another network cable to connect to the "LAN" port of the PoE adapter, and connect the other end of the network cable to the computer's "LAN" port.
Step 3. Find the number of the Wireless Bridge CPE digital display tube. For example, the number is 1 and the CEP is the A master bridge, then the IP of this CPE is 192.168.255.101; if the CPE is the B slave bridge, then the IP address of the CPE is 192.168.255.201.๏ผThere is a table corresponding to a number and IP in the manual๏ผ
Step 4. Very important step: Modify your computer's IP address, change your computer's IP address to 192.168.255.xxx(192.168.255.xxx cannot be the same as the IP of the CPE), make your computer's IP and the bridge's IP address be on the same network segment so that you can access them. Please refer to the manual to modify the computer IP address step or Google searches how to modify the computer IP address, it is very simple.
Step 5. After you modify your computer's IP address, you open the computer browser and enter the IP address of the wireless bridge to access. For example, enter 192.168.255.101 to access.
Step 6. Enter the account password "admin/admin" to access, and set it after successful access.
